![Winrock](https://cs.fastenerscrews.com/wp-content/uploads/Banner02.jpg)
Specifikace
xm19/s20910 hex bolt din931 m36
1.material:xm19/s20910
2.Finish:nickel
3.ISO9001
xm19/s20910 hex bolt din931 m36
1. xm19/s20910 stud bolts
2.Size: M4-M100(1/4-4 inch) 3.Standard: ANSI ,DIN,ASME,ASTM 4.Material: inconel ,S32750,S32760,S31803,904L,Incoloy 925, ASTM A453- 660A,Inconel 625, Hastelly C-22, Monel 400, Monel K-500, Nimonic 80A, Zr 702, Zr 705, 254SMO, etc.
Packing:Suitable for exporting
XM-19 Stainless Steel, a highly fabricable, highly weldable, nitrogen strengthened, austenitic stainless steel, provides twice the yield strength of stainless steel type 316 and a resistance to corrosion equivalent to type 316. Even after extreme forming, XM-19 Stainless Steel stays non-magnetic. Due to all these advantages, it is often used in boat shafting, marine hardware, pumps, valves, and fasteners. The machinability of XM-19 Stainless Steel is comparable to that of alloy 316 or 317. It is formable, but there will be more springback with XM-19 than with other austenitic stainless steels. To achieve maximum hardness, use cold working. Because of XM-19's high tendency toward work hardening, process anneal the work piece after forming to relieve stress.
Chemie
Chemical Requirements | |||||||
---|---|---|---|---|---|---|---|
Ni | Cr | Po | Mn | C | Si | Fe | |
Max | 13.5 | 23.5 | 3.00 | 6.0 | 0.06 | 1.00 | Bal |
Min | 11.5 | 20.5 | 1.50 | 4.0 |
Tensile Data
Mechanical Property Requirements | |||||
---|---|---|---|---|---|
Ultimate Tensile | Yield Strength (0.2% OS) | Elong. | R/A | Tvrdost | |
Min | 100 KSi | 55 KSi | 35% | 55% | |
Max | 293 | ||||
Min | 690 MPa | 380 MPa | |||
Max |
There are other high strength properties available for sizes of bar, wire, sheet and plate. Inquire with a sales associate at High Performance Alloys for more information. See bulletin, or brochure on the material (above) for a quick overview.
Specifikace
Formulář | Standard |
---|---|
Metal Type | UNSS20910 |
Bar | ASTM A193 ASTM A194 ASTM A276 ASTM A479 AMS 5764 |
Drát | |
List | ASTM A240 AMS 5861 |
Deska | ASTM A240 AMS 5861 |
Kování | |
Kování | ASTM A182 ASTM A193 ASTM A 194 ASTM A276 ASTM A479 AMS 5764 |
Weld Wire | A5.9 ER209 |
Din | 1.4565 |
Rychlé informace
Místo původu: Jiangsu, Čína (pevnina)
Název značky: HPF, QFC
Číslo modelu: M3-M48
name: xm19/s20910 stud bolts m24 all lengh
material: Nitronic 50
Standard: USS,DIN,JIS,GB,BS